Operation Manual

Step 2: Check the Network Adapter
20 KEN! – 2 Installing and Configuring KEN! Service
Binding the TCP/IP protocol to the network adapter in Win-
dows Me. These settings may look different on your computer.
3. If no entry is listed for TCP/IP, add the protocol using
the command “Add... / Protocol / Microsoft / TCP/IP”.
4. Click “Properties...” and specify an IP address for the
network adapter.
In the entire KEN! manual the IP address 192.168.115.1
is used as the specified IP address. We recommend as-
signing this IP address for the KEN! Service PC as long
as there is no conflict with existing settings.
5. Make note of the specified IP address.
Example for the IP address 192.168.115.1 of the KEN! Service
PC. These settings may look different on your computer.
6. If you made any changes to these settings, apply them
and save your entries. Keep your Windows CD ready
and restart Windows.