Operation Manual

Step 2: Check the Network Adapter
KEN! – 2 Installing and Configuring KEN! Service 21
Windows 2000
1. Click through “Start / Settings / Network and Dial-up
Connections” to open the Windows network settings.
2. Select the “LAN connection” entry, open the context
menu and select “Properties”.
3. Look for the “Internet Protocol (TCP/IP)” entry in the list
of installed network components.
TCP/IP protocol binding to a network adapter in Windows
2000. These settings may look different on your computer.
4. Click “Properties...” and specify an IP address for the
network adapter.
In the entire KEN! manual the IP address 192.168.115.1
is used as the specified IP address. We recommend as-
signing this IP address for the KEN! Service PC as long
as there is no conflict with existing settings.
Example for the IP address 192.168.115.1 of the KEN! Service
PC. These settings may look different on your computer.
5. Make note of the specified IP address.