Operation Manual

Step 4: Configure KEN! Service with the Wizard
KEN! – 2 Installing and Configuring KEN! Service 25
Step 4:
Configure KEN! Service with the Wizard
When the KEN! Service PC is restarted after installation, the
KEN! Wizard starts automatically. This program assists you in
configuring KEN! for your network. The first window of the
KEN! Wizard is the welcome window.
The welcome window of the KEN! Wizard
1. Click the “Next” button in the KEN! Wizard welcome
window.
2. In the next window, specify whether the service “CAPI
Services” is to be used. This service provides all KEN!
Clients with access to ISDN services like fax and file
transfer. Confirm your entries by clicking “Next”.
3. To use KEN! for access to the Internet, accept the preset
option “Activate Internet Access” in the next window.
4. If the ISDN adapter in the KEN! Service PC is connected
to a PBX, activate the “Operation PBX” option and enter
the outside dialing access (usually “0”).
5. Then select your provider from the list of Internet pro-
viders. If your provider is not included in the list, select
“Add new Internet provider”. Click “Next”.