Operation Manual

Step 4: Configure KEN! Service with the Wizard
KEN! – 2 Installing and Configuring KEN! Service 27
– If the user already has an E-mail address at an E-
mail provider, enter it here. Click “Next”.
– If this user is only allowed to send E-mail within the
KEN! network, activate the option “Only use this E-
mail address within the local network.” Click “Next”
and continue from step 11.
9. In the next window, enter the E-mail provider's parame-
ters for sending and receiving E-mail. These data are
supplied by your provider.
Example: Entries for the SMTP server, POP3 server, POP3 ac-
count name and password of a user
10. In the next window, accept or change the settings for
the weekly budget. When the ISDN charges or connec-
tion times exceed the weekly budget for Internet and
ISDN connections, KEN! will not allow any further ISDN
communication. Existing connections will be cleared
down.
Click “Next”.
The weekly budget for connection charges can be used
only if the transmission of charge information is en-
abled by your network operator.
11. The next window presents an overview of which of the
three KEN! services have been activated and deactivat-
ed.
Here you have the opportunity to check the settings you
just made using the Dr. KEN! diagnosis program.
If you do not wish to check the configuration, deactivate
the option “Dr. KEN! checks all settings configured up-
on leaving the Wizard”.