Operation Manual

Step 2: Settings in the E-mail Application
KEN! – 2 Installing and Configuring KEN! Service 33
If you were unable to establish a connection to the AVM
home page, check whether all installation requirements
have been met. For further trouble-shooting, start the Dr.
KEN! diagnosis program by clicking “Administration / Diag-
nosis”.
Other Browsers
In order to use Internet services with KEN! it is necessary to
activate the use of a proxy server in the browser and to enter
the port and address of the proxy server.
Enter the following values for the service types “HTTP”, “Se-
cure”, “FTP” and “Socks”. The IP address of the KEN! Service
PC must be entered as the address of the proxy server (see
„Step 2: Check the Network Adapter“ auf Seite 19; the IP ad-
dress 192.168.115.1 is listed as an example there).
Step 2:
Settings in the E-mail Application
If you already added a KEN! User during the installation of
KEN! Service with the Wizard, this user must now be activat-
ed in your E-mail application. Read the sections below.
Outlook Express 5
If you are working with Outlook Express 5, these settings can
be configured automatically with KEN!.
The following section describes how to start the automatic
configuration and how to check the settings after configura-
tion.
1. Open the KEN! home page by clicking “Start / Programs
/ AVM KEN! / KEN! Home Page”.
Service type Address of the proxy server (example) Port
HTTP 192.168.115.1 3128
Secure 192.168.115.1 3128
FTP 192.168.115.1 3128
Socks 192.168.115.1 1080