Operation Manual

Step 2: Settings in the E-mail Application
38 KEN! – 2 Installing and Configuring KEN! Service
14. Enter the password for this user in the “Password” field.
For reasons of security the password was not transmit-
ted automatically to the E-mail application.
15. Check the “Connection” page to make sure that the op-
tion “Always connect to this account using: Local Area
Network” is selected.
“Connection” page in the properties of an account
16. Implement your entries by clicking “OK” and then
“Close”.
Other E-mail applications
Proceed as follows to activate the newly created user in your
E-mail application:
1. Open the KEN! home page by clicking “Start / Programs
/ AVM KEN! / KEN! Home Page”.
2. Click “Configure the User’s E-mail Program”. The follow-
ing window presents a table in which the KEN! Users
you have created are registered with the E-mail ad-
dresses they have been assigned.
3. Click on this entry in the “Other E-mail programs” col-
umn. In the next window, select the E-mail program for
which you would like to configure the user.
4. The table that appears contains the data which you
must enter for the user in the E-mail application.