Operation Manual

Adding a New User at a KEN! Client
KEN! – 2 Installing and Configuring KEN! Service 39
2.3 Adding a New User at a KEN! Client
All KEN! Users in your network that are to send and receive E-
mail must be added on the KEN! Service PC and assigned an
E-mail address. After each user is added, an E-mail applica-
tion must be configured at the KEN! workplace he or she us-
es (see the section „Step 2: Settings in the E-mail Applica-
tion“ auf Seite 57).
The following describes how to add a new E-mail user to
KEN! with the KEN! Wizard.
Step 1:
Adding a User in the KEN! Program
1. Open the KEN! user interface on the KEN! Service PC by
clicking “Start / Programs / AVM KEN!”.
2. In the “KEN! User” menu, select the ”Add User“ com-
mand. The KEN! Wizard opens.
3. Enter the user data in the next dialog.
The KEN! Wizard for adding a new user
4. In the next window, select an E-mail address for the us-
er or configure a new address for this user. If you select
an existing E-mail address, click “Finish”. To create a
new E-mail address, select “Next”.