Operation Manual

Removing KEN! Service
KEN! – 2 Installing and Configuring KEN! Service 41
2.4 Removing KEN! Service
Before removing KEN! Service, it is important to save all mail
temporarily on hard disk of the KEN! Service PC so that no
E-mail messages are lost through uninstallation.
Step 1:
Save all E-mail Stored Temporarily
Check the E-mail service of the KEN! program to make sure
that no more E-mail messages are in the KEN! Service PC’s
temporary memory.
1. If E-mail for the Internet is stored temporarily, initiate E-
mail exchange.
2. If E-mail for the users are located on the hard disk, ask
all KEN! Users to pick up their E-mail from the KEN! Ser-
vice PC.
Step 2:
Removing KEN! Service
You must exit KEN! before uninstallation.
Proceed as follows to remove KEN! Service:
1. Close the KEN! program interface and end KEN! by click-
ing with the right mouse button on the KEN! icon in the
status area of the task bar.
2. Click the “Add/Remove Programs” icon in the Control
Panel (“Start / Settings”).
3. On the “Install/Uninstall” page, select the list entry
“AVM KEN!” and then click the “Add/Remove...” button.
4. Confirm that KEN! is to be removed by clicking “Yes” in
the next window.
5. End uninstallation by clicking “OK”.
6. Reboot your computer.
Rebooting the computer concludes the uninstallation of
KEN!.