Operation Manual

Step 1: Check the Network Adapter
44 KEN! – 3 Installing and Configuring KEN! Client
TCP/IP network protocol
3. Select the “TCP/IP” entry and click “Properties”. The “IP
Address” settings page indicates how the IP address is
assigned.
We recommend obtaining an automatically assigned IP
address from the KEN! Service PC.
Obtaining an IP address automatically
Click “OK” to obtain an IP address automatically. This
concludes the configuration test. Continue reading from
„Step 2: Start KEN! Client Installation“ auf Seite 49.
4. It is also possible to assign KEN! Clients static IP ad-
dresses. In this case, check the following settings:
– These IP addresses may not conflict with the set-
tings on the KEN! Service PC (see „Step 2: Check the
Network Adapter“ auf Seite 19; the IP address
192.168.115.1 was named as an example there. The
example allows the static IP addresses
192.168.115.2 through 192.168.115.254).