Operation Manual

Step 1: Check the Network Adapter
KEN! – 3 Installing and Configuring KEN! Client 47
Example of a static IP address for TCP/IP
– In the “Preferred DNS server” field, enter the IP ad-
dress of the KEN!
Service PC and confirm with “OK”.
5. Apply and save your entries. Keep your Windows CD
ready and restart Windows.
Windows NT
For a KEN! Service installation on a Windows NT computer, it
is imperative that the current Microsoft Service Pack be in-
stalled on this computer first. Moreover, the Service Pack
must be reinstalled after every change which required in-
serting the Windows NT CD. This is the only way to ensure
that the current Service Pack files are always installed on
your computer.
1. Click through “Start / Settings / Control Panel / Net-
work” to open the Windows network settings.
2. Select the “TCP/IP Protocol” entry on the “Protocols”
settings page. If the entry is not listed, add the binding
by clicking “Add... / Protocol / Microsoft / TCP/IP”.