Operation Manual

Step 2: Start KEN! Client Installation
KEN! – 3 Installing and Configuring KEN! Client 49
5. It is also possible to assign KEN! Clients static IP ad-
dresses. In this case, check the following settings:
Example of a static IP address for TCP/IP
– These IP addresses may not conflict with the set-
tings on the KEN! Service PC (see „Step 2: Check the
Network Adapter“ auf Seite 19; the IP address
192.168.115.1 was named as an example there. The
example allows the static IP addresses
192.168.115.2 through 192.168.115.254).
– On the “DNS” settings page, use the “Add...” button
to enter the IP address for the DNS server of the
KEN! Service PC.
6. Apply and save your entries. Keep your Windows CD
ready and restart Windows.
Step 2:
Start KEN! Client Installation
Three versions of the installation program are available for
KEN! Clients:
• ISDN, Internet and E-mail over KEN!
• ISDN over KEN!
• Internet and E-mail over KEN!