Operation Manual

Step 2: Start KEN! Client Installation
50 KEN! – 3 Installing and Configuring KEN! Client
With the version “ISDN, Internet and E-mail” the KEN! Client
has access to both ISDN and Internet services. The
“ISDN”
version allows KEN! Clients to use ISDN services only. With
the version
“Internet and E-mail” the KEN! Client has access
to only Internet and E-mail services.
We recommend installing the “ISDN, Internet and E-mail”
version. Any of these services may be subsequently deacti-
vated on the KEN! Service PC if desired.
To install KEN! Client, proceed as follows:
1. Insert the KEN! CD in your CD-ROM drive. A CD introduc-
tion is started automatically.
The CD introduction also can be started manually by
double-clicking on the INTROE.HLP file in the root direc-
tory of the CD.
2. The welcome window appears. Start the KEN! Client in-
stallation by clicking the line “KEN! Client”.
3. In the next window, select which KEN! Client version
should be installed. Select among “ISDN, Internet and
E-Mail over KEN!”, “ISDN over KEN!” or “Internet and
E-Mail over KEN!”.
4. In the next screen, enter the path in which KEN! Client is
to be installed. The path C:\PROGRAM FILES\KEN! is
suggested by default, but any other path may be speci-
fied. Confirm the installation path by clicking “OK”. The
KEN! Client program files are installed.
5. Reboot your computer to conclude the installation
Once the computer has been rebooted, the KEN! Client in-
stallation is complete.
When the computer is rebooted, KEN! Client is started auto-
matically. The KEN! icons are located in the status area of the
task bar. They indicate that KEN! Client is ready for opera-
tion.
Information about the exact status of KEN! can be obtained
by clicking the icon and selecting the menu command
“Open
KEN! Client”. The
“KEN! Client” window appears.