Operation Manual

Testing ‘CAPI Services’
KEN! – 3 Installing and Configuring KEN! Client 51
The upper section of the window displays information about
which KEN! Client version you selected. The lower section of
the window reports whether the KEN! Service PC is switched
on and which services are activated.
Status window on the KEN! Client
3.2 Testing ‘CAPI Services’
If the version “ISDN and Internet” or “ISDN” is installed on
the KEN! Client, the next step is to check the installation of
“CAPI Services”. The following describes how to establish an
ISDN connection to the AVM Data Call Center (ADC).
1. Start the FRITZ!data program using the menu com-
mands
“Start / Programs / FRITZ!”.
2. If the ISDN adapter in your KEN! Service PC is connected
to a PBX, check the “PBX” dialog page in “File / Set-
tings” to determine whether it is configured for outside
line access.
3. Then click the “Dial” button in the tool bar. A window
appears in which information may be entered for re-
mote connections.
4. Enter the number for the AVM Data Call Center (ADC) in
Berlin:
030 / 39 98 43 00
Remember to adjust the international dialing prefix as
required.
+49 (0)30 / 39 98 43 00