Operation Manual

Configuring the Browser and the E-mail Application on the KEN! Client
KEN! – 3 Installing and Configuring KEN! Client 53
If you were unable to establish a connection to the AVM Data
Call Center, check whether all installation requirements have
been met. Test the ISDN-Controller on the KEN! Service PC.
See also the “Tips & Tricks” from the KEN! program group.
3.3 Configuring the Browser and the
E-mail Application on the KEN! Client
This section describes which settings must be made to your
browser and your E-mail application before all Internet and
E-mail services can be used with KEN!.
Step 1:
Settings in the Browser
In order to use Internet services with KEN! it is necessary to
activate the use of a proxy server in the browser and to enter
the port and address of the proxy server.
Internet Explorer 5
If you work with Internet Explorer 5, KEN! will configure these
settings automatically.
The following section describes how to start the automatic
configuration and how to check the settings after configura-
tion.
1. Start Internet Explorer 5.
2. In the “Address” field, enter any Internet page, e.g.
www.avm.de. If the Internet page is displayed, no fur-
ther configuration is necessary.
3. If the following page appears instead of the desired In-
ternet site, click on the selected entry “Detect Network
Settings”.