Operation Manual

Step 2: Settings in the E-mail Application
KEN! – 3 Installing and Configuring KEN! Client 57
Other browsers
In order to use Internet services with KEN! it is necessary to
activate the use of a proxy server in the browser and to enter
the port and address of the proxy server.
Enter the following values for the service types “HTTP”, “Se-
cure”, “FTP” and “Socks”. The IP address of the KEN! Service
PC must be entered as the address of the proxy server (see
„Step 2: Check the Network Adapter“ auf Seite 19; the IP ad-
dress 192.168.115.1 is listed as an example there).
Step 2:
Settings in the E-mail Application
If you have already added a user for the KEN! Client, this user
now must be activated in your E-mail application. Read the
following sections.
Outlook Express 5
If you are working with Outlook Express 5, these settings can
be configured automatically with KEN!.
The following section describes how to start the automatic
configuration and how to check the settings after configura-
tion.
1. Open the KEN! home page by clicking “Start / Programs
/ AVM KEN! / KEN! Home Page”.
From this page the automatic configuration of the
E-mail application Microsoft Outlook Express is started.
The Internet Explorer 5 home page was changed by the
KEN! Service installation. After configuring the E-mail
user, the home page can be changed again as desired.
Service type Address of the proxy server (example) Port
HTTP 192.168.115.1 3128
Secure 192.168.115.1 3128
FTP 192.168.115.1 3128
Socks 192.168.115.1 1080