Operation Manual

Step 2: Settings in the E-mail Application
KEN! – 3 Installing and Configuring KEN! Client 61
address of the KEN! Service PC (see „Step 2: Check the
Network Adapter“ auf Seite 19; the IP address
192.168.115.1 was used as an example).
“Servers” page in the properties of an account
In the field “Name” the user name from KEN! was en-
tered by the automatic configuration routine.
14. Enter the password for this user in the “Password” field.
For reasons of security the password was not transmit-
ted automatically to the E-mail application.
15. Check the “Connection” page to make sure that the op-
tion “Always connect to this account using: Local Area
Network” is activated.
“Connection” page in the properties of an account
16. Implement your entries by clicking “OK” and then
“Close”.