Operation Manual

Overview of KEN!
64 KEN! – 4 Overview of KEN!
4 Overview of KEN!
This chapter provides general information about how KEN!
works, along with information about how to configure the
KEN! program on the KEN! Service PC.
4.1 Starting and Exiting KEN!
KEN! is started automatically every time Windows is started.
Once the program has started, the KEN! icon appears in the
status area of the task bar.
The user interface can be opened and closed independently
of the KEN! program. As long as the KEN! icon is visible in
the task bar, the program is running, even when the user in-
terface is closed.
Opening the KEN! user interface
To open the user interface of KEN!, click on the KEN! icon in
the task bar and select the “Open KEN!” command. The user
interface is opened.
Closing the KEN! user interface
Select the “Exit” command from the “File” menu.
This command closes only the user interface. The KEN! pro-
gram continues to run.
Exiting the KEN! Program
To end KEN! operation, click the KEN! icon in the task bar. A
small menu appears. Click the “Exit KEN!” command. The
KEN! program is ended.
Once KEN! has been exited, ISDN and Internet services via
KEN! are no longer available to the network. If you work with
the KEN! E-mail server in the network, internal E-mail ex-
change is no longer possible either.