Operation Manual

The KEN! icon in the system tray
KEN! – 4 Overview of KEN! 65
Starting the KEN! Program
When the KEN! Service PC is started, KEN! starts automatical-
ly.
If you have exited the KEN! program, restart it by selecting
“Start / Programs / AVM KEN!”.
The KEN! icon in the system tray
The KEN! icon in the status area of the task bar indicates the
current status of the KEN! Internet and ISDN connection. The
following status messages are possible:
Both LEDs are gray. KEN! is on standby, ready to connect. No
ISDN or Internet connection has been established.
One LED is gray, one LED is green. An ISDN connection is ac-
tive. One B channel is busy.
Both LEDs are green. An ISDN connection is active. Both B
channels are busy.
One LED of the icon is green and the globe appears in color.
An Internet connection is active. One B channel is busy.
Both LEDs are green and the globe appears in color. An Inter-
net connection is active. Both B channels are busy.
E-mail for the user has arrived at the KEN! Service PC.
KEN! is not ready for operation. An error has occurred.
4.2 The KEN! Wizards
The KEN! Wizards assist you in configuring KEN! for your net-
work.
After the initial installation of KEN! Service, a Wizard starts
automatically to walk you through all of the necessary set-
tings: Here the KEN! services are configured, a user and an E-
mail address are created, and settings for the weekly bud-
gets are defined.