Operation Manual

Automatic Disconnect
72 KEN! – 4 Overview of KEN!
Example: Entering the Internet access data in the KEN! Wizard
Automatic Disconnect
In the KEN! Service PC settings you can specify after how
many minutes and seconds of inactivity (no data traffic on
the line) an existing Internet connection should automatical-
ly be cleared down. This function helps save connection
costs.
This period is preset to a value of 30 seconds.
If the provider’s charge interval is to be taken into account in
clearing connections automatically, activate this option and
specify the duration of one charge interval. Each charge in-
terval begun is exploited fully before automatically clearing
the connection. The connection is cleared two seconds be-
fore the next charge interval begins.
Entering the values for automatic disconnection and charge interval
ISDN Channel Bundling
A number of Internet providers offer the option of “channel
bundling” to increase ISDN transmission speed. This option
allows both B channels to be used for ISDN file transfer.
This makes data transmission over both B channels on one
ISDN line at a data transmission speed of 64 kBit/s on each
channel. Channel bundling means that data are transmitted
at double the speed of single-channel connections.