Operation Manual

95
3 Driver Software Installation – Windows 3.x
English
3. Start Windows.
4. By default the program M2 Load is added to the
“Startup” program group by the installation routine,
so that the Controller is loaded automatically when
Windows starts. If you do not want the Controller
loaded automatically, simply delete the icon from
the “Startup” group.
To load the Controller manually, double-click on the
M2 Load icon for the desired D channel protocol—
such as M2 Load DSS1—in the “AVM” program
group.
When the Controller is loaded, the following message
box appears:
Fig. 4 Controller sign-on message in Windows 3.x (DSS1
protocol)
3.2.3 Unloading the Driver Software
To remove the driver software from memory, double-
click on the M2 Unload icon in the “AVM” program group.
A message appears to confirm that the Controller is no
longer active.