User guide

75
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “CLEAR USER DATA” + ‘ENTER’
After pressing ‘ENTER’ a window appears; press ‘ENTER’ to confirm deletion, or ‘CLEAR’ to abort
function. The message “DONE” will appear confirming the action.
14.8 CLEAR ALL RADIALS
You can delete all stored Projected Radial lines displayed on the Moving Map with this one
function.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “CLEAR ALL RADIALS” + ‘ENTER’
After pressing ‘ENTER’ a window appears; press ‘ENTER’ to confirm deletion, or ‘CLEAR’ to abort
function.
The message “DONE” will appear confirming the action.
14.9 FACTORY DEFAULTS
This will restore the EKP-IV to all factory default settings.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENTER’ + “FACTORY DEFAULTS” + ‘ENTER’
After pressing ‘ENTER’ a window appears; press ‘ENTER’ to confirm , or ‘CLEAR’ to abort function.
The message “DONE” will appear confirming the action.