User Manual 2.5 GEOSAT2 v2.
Dear customer, thank you for choosing our satellite navigation system Geosat2 GPS Car Navigator. We hope it will be helpful to give you the right prompts to reach your destination. Before using it please read carefully the user manual to know all its features and to be able to enjoy it better. For further information please visit our website www.avmap.it.
Summary 1. Installation ........................................................................................................................................................................... 25 INSTALLATION ........................................................................................................................................................................ 25 MOUNTING THE BRACKET ..........................................................................................................
1. Installation INSTALLATION Geosat2 is easy and quick to install. MOUNTING THE BRACKET Geosat2 can easily be mounted on every vehicle provided with car lighter, if installed wrongly it might not work properly. To work well it must be fixed on the dashboard with one of the brackets given in the box. Do not put it on the passenger seat, because it might be a dangerous distraction for the driver. ♦ The rotating bracket must be attached on the windscreen by its sucker, it can be used on most vehicles.
MOUNTING THE GPS ANTENNA The next step is the GPS antenna installation. The end of the antenna is magnetic so that you can place it outside the vehicle, its cable is made of a torn proof material so that it does not break even if it is closed between the door and body of the vehicle. The antenna can be placed on the dashboard or on the back of the vehicle, but Geosat2 will work better if it is put outside, on the bonnet or on the roof.
2. How to use Geosat 2 THE KEYBOARD POWER key ♦ ♦ ♦ ♦ ♦ Power On the unit. Brightness and Contrast adjustment. Fast Brightness adjustment. Moves the cursor to change the parameters. Turns Off the unit (press and hold for 3 seconds). key ♦ Changes the displayed page (Map, Trip Computer, track directions). key ♦ Changes the mode of the displayed page. key ♦ Reads the information about the point under the cursor. and ♦ ♦ keys Zooms in. Zooms out. key ♦ ♦ Quits menu.
♦ ♦ Selects items. Selects the keys on the virtual keyboard. key ♦ Finds a place, a town, a Mark, a point given its latitude and longitude (LAT/LON) and it displays the latest researches. key ♦ Displays the menus: press once to see the menu about the current page, press twice to see the main menu to set up the unit and to select special functions. key ♦ ♦ Plays the last voice prompt. Adjusts the speaker volume (press and hold for three seconds).
Use [+] key to show the map area with more detail, especially in towns with many streets. Pressing [FIND] you can also look for a destination: by name, by nearness to your position, by latitude or longitude or among your latest researches. HOW TO CREATE A MARK With Geosat2 you can create and save many Marks (User Points), wherever you are, you can enter your customers, your house or your favourite restaurant. These Marks are easy to display, to change and to use as destinations.
ABOUT THE MENUS In every page you can display a submenu concerning that page just pressing [MENU]. GENERAL NOTES The digital chart in this navigator might be inaccurate or incomplete to some degree because of the continuous growth of towns and suburbs. Our software will be frequently updated and you will be able to download it for free from our website www.avmap.it. HOW TO TUNE GEOSAT2 ♦ ♦ ♦ ♦ ♦ Press twice [MENU], select "System Setup" and confirm your choice pressing [ENTER].
In MENU “Track” you can enter all the settings regarding the way of recording/ displaying of the track. In MENU “Alarms” you can enter a speed limit and a speed alarm when you exceed it. You can also enter a Mark alarm informing you when you reach a Mark. Moreover you can set a GPS fix lost alarm. In MENU “Date &Time” you can enter all the settings of time and date and also activate "Elapsed Timer" and/or "Countdown". In MENU “Units” you can set the units of measurements.
3. Warranty Conditions and Technical Supporting DEFINITIONS Warranty Product Conformity SC (Supporting Center) Purchaser indicates the concrete declaration of guarantee. indicates the equipment with the logo Geosat2, contained in the wrap. indicates the correspondence of the Product to the aesthetical, the technical and functional features reported in the User Manual, included in the packaging.
Immediate expiry of the warranty effects Up to the warranty, the recognized rights to the Purchaser go down absolutely according to the following eventualities: ♦ If the Supporting Center verifies previous interventions on unauthorized person’s behalf, and/or interventions on the product making use of replacements that are not original and/or not officially recommended by the producer.
to the operator the problem you have. The operator of the Supporting Center will tell you the authorization number. At that point, the Purchaser will be able to send the broken equipment to the below address for the reparation on guarantee. The seller can follow the previous procedures or contact the telephone number (+39) 0585 772410 TECHNICAL SUPPORTING CENTER AvMap S.r.l. Via Caboto, 9 - 54036 Marina di Carrara (MS) - ITALY Tel.: +39 0585 772410 Fax: +39 0585 784044 www.avmap.it - info@avmap.
4. Troubleshooting A) MASTER RESET, to do in case of software malfunctions: Note ♦ ♦ ♦ ♦ ♦ User’s waypoints and settings will be deleted. Switch Geosat2 Off. Switch it On pressing [POWER] together with another key. A new MENU will be displayed on the screen. Use [CURSOR] to select RAM Menu and press [ENTER]. With the right [CURSOR] select RAM clear. When RAM clear is highlighted press [ENTER] and [ENTER] again to confirm.
36 5.
MENU DIAGRAM User Manual 37
