User's Manual

Page 17 of 36
July 22 2020
Data Sheet and User Manual
AES-MS-MT3620-M-G Module
Data Sheet and User Manual
Current Consumption
Power mode
Description
Details
Typical
current
consumption
Hardware
wake-up
latency
Subsystem
Power
State
RTC mode
Only RTC
domain is on.
Memory is not
retained.
Requires a cold
boot to resume
Pluton CM4 subsystem
Off
0.01mA or
0.02mA (*1)
24ms
(crystal and
PLL lock,
PMU time
CA7 subsystem
Off
CM4F I/O subsystems
Off
Wi-Fi subsystem
Off
Buses/peripherals
Off
Worst case
power
consumption
no Wi-Fi
All subsystems
apart from
Wi-Fi running
at full speed
Pluton CM4 subsystem
On
220mA
Worst case
380mA (*2)
N/A, 650us
WiFi
subsystem
resume
latency
CA7 subsystem
On
IO 0/1 CM4
subsystems
On
Wi-Fi subsystem
Light sleep
Buses/peripherals (*3)
On
Worst case
power
consumption
with Wi-Fi
(*2)
All subsystems
running at full
speed, Wi-Fi
very active
Pluton CM4 subsystem
On
520mA (*4)
Worst case
750mA (*2)
N/A
CA7 subsystem
On
IO 0/1 CM4
subsystems
On
Wi-Fi subsystem
On
Buses/peripherals (*3)
On
RF (A or G Band)
On
Flash (*5)
On
Note *1: 0.01mA/0.02mA with/without external 3.3v source PMIC control switch respectively.
Note *2: The current values are measured under typical case (TT silicon and 25C/1.15V) and
the TDP (max thermal design power) includes simulation worst case condition
(TT/125C/1.15V/MC99 ,MC99 is PTPX power simulation library).
Note *3: It depends on how busy the peripherals are and how they are configured.
Note *4: This data is based on 100% Wi-Fi transmission on the 5GHz band at 14dBm.
Note *5: It depends on the I/O loading and flash power consumption.