User's Manual

Page 23 of 36
July 22 2020
Data Sheet and User Manual
AES-MS-MT3620-M-G Module
Data Sheet and User Manual
Wi-Fi RF Receiver Blocking Specifications
The specifications in table below are measured at the antenna port, which includes the front-end loss.
Parameter
Description
Performance
Min
Typical
Max
Unit
Receiver in-band blocking(1)
CW and BT interferers
2.4 GHz CW and BT interfering signal
@ ±20MHz offset
-47
-
-
dBm
2.4 GHz CW and BT interfering signal
@ ±25MHz offset
-40
-
-
dBm
5 GHz CW interfering signal
@ ±20MHz offset
-35
-
-
dBm
Receiver out-band
blocking(1)
CW interferer
25 ≤ f < 2300 MHz
-28
-
-
dBm
2300 ≤ f < 2395 MHz
-40
-
-
dBm
2483.5 < f ≤ 2583.5 MHz
-45
-
-
dBm
Receiver out-band blocking(1)
CDMA, GSM, DCS and
PCS interferers(2)
CDMA UL: 824 – 849 MHz
-20
-
-
dBm
CDMA DL: 869 – 894 MHz
-10
-
-
dBm
GSM UL: 880 – 915 MHz
-10
-
-
dBm
GSM DL: 925 – 960 MHz
-10
-
-
dBm
DCS UL: 1710 – 1785 MHz
-13
-
-
dBm
DCS DL: 1805 – 1880 MHz
-20
-
-
dBm
PCS UL: 1850 – 1910 MHz
-20
-
-
dBm
PCS DL: 1930 – 1990 MHz
-20
-
-
dBm
Receiver out-band blocking(1)
WiFi interferers
5G receiver only, interfering signal:
2400 < f ≤ 2483.5 MHz
-20
-
-
dBm
2G receiver only, interfering signal:
5125 < f ≤ 5850 MHz
-20
-
-
dBm
Note 1: The desired signal's strength is 3 dB above the Maximum RX sensitivity. PER ≤ 10%.
Note 2: Except harmonic mixing.