User's Manual

Page 36 of 36
July 22 2020
Data Sheet and User Manual
AES-MS-MT3620-M-G Module
Data Sheet and User Manual
The pinout of the 2x5 pin footprint chosen for inclusion on the OEM board, should be as tabled below:
#
MT3620
Net Name
Module
Pad
I/O
#
MT3620
Net Name
Module
Pad
I/O
1
GND
63
-
2
GND
62
-
3
IO0_TXD
60
O
4
SERVICE_CTS
55
I
5
SERVICE_RTS
54
O
6
SERVICE_RXD
53
I
7
SERVICE_TXD
52
O
8
SYSRST_N
51
I
9
DEBUG_TXD
46
O
10
DEBUG_RTS
45
O
DEBUG_RTS is driven high by the PC during SYSRST_N of the MT3620 to initiate Sphere OS RECOVERY
The corresponding pads of these UART interfaces are located on same edge of the module for easy routing
to the selected 2x5 pin connector footprint on the OEM host board
Figure 9 – Module Pinout to Recommended Service & Debug Interface Connector