User guide

8 Integrated LCD KVM Switch Installer/User Guide
To upgrade your Integrated LCD KVM Switch:
Prior to beginning the firmware upgrade process, ensure that you have
an RS-232 port (COM port), a mouse and a keyboard directly connected
to the host server. You will also need the upgrade cable, upgrade utility
and upgrade file.
NOTE: When enabling the upgrade mode via the OSD, be sure to connect a
monitor directly to the host server that performs the upgrade.
1. Turn on the Integrated LCD KVM Switch.
2. Press the Menu button twice to invoke the OSD menu and press F1
to enter the Setup Page. Navigate to Upgrade Firmware and press
the
Enter button.
3. Select Yes and press the Enter button to enable upgrade mode.
4. Use the firmware upgrade cable to connect the RS-232 port (COM
port) of the host server to the Daisy Chain In port of the (primary)
Integrated LCD KVM Switch.
5. Double-click on the SV1000 upgrade utility icon to bring up the
following window.
NOTE: The firmware upgrade process automatically upgrades all Integrated LCD
KVM Switches daisy-chained to your primary switch.
Figure 1.6: Main Upgrade Utility Window
6. Click Select File to locate the firmware upgrade file.
7. Click Check Version to see the current firmware version of your
Integrated LCD KVM Switch. If the selected firmware file is a
newer version, click Upgrade to start the upgrade process.