User Guide

Button name Use
reload page Reloads the page.
Help Displays the online help.
next Only appears in Wizard mode. Goes to the next form.
unsaved changes
The unsaved changes button appears on the lower right hand corner of the web
manager and a graphical LED blinks red whenever the current user has made
any changes and has not yet saved the changes.
no unsaved changes
The no unsaved changes button appears and a graphical LED appears in green
when no changes have been made that need to be saved.
The various web manager actions for trying, saving and restoring configuration changes are
summarized in the following table.
Task Action Result
try changes Click the try changes button
Updates the appropriate configuration files. Changes are
preserved if you log in and log out and even if you restart the
system. Changes stay in effect unless the cancel changes
button is clicked. The changes can be restored at any time
until the apply changes button is clicked.
cancel changes
Click the cancel changes
button
Restores the configuration files from the backup that was
created the last time changes were applied.
apply changes Click the apply changes button
If try changes has not been previously clicked, updates the
appropriate configuration files. Overwrites the backed up
copy of the configuration files.
Table 4.2: Administrator - Options for Trying, Saving and Restoring ConfigurationChange
The following table illustrates the information that displays in the upper right corner of all web
manager forms.
Form Area Button and
Information
Purpose
logout Click this button to log out.
Host Name: Cyclades
IP Address: 192.168.48.11
Model: ACS5016
Displays the hostname, IP address assigned during initial configuration
and the model number of the console server.
Table 4.3: Administrator - Logout Button and Other Information in the Upper Right
34 Cyclades
®
ACS5000 Installation/Administration/User Guide