Cyclades-PR1000 Access Router Installation Manual

Cyclades-PR1000

30Chapter 4 - Step-by-Step Instructions

STEP SIX

Two static routes must be added to tell the router that all traffic not intended for the local LAN should be sent to the

Access Provider. Chapter 9 of the Installation Manual explains static routes and other routing methods available

in CyROS. Fill in the spaces in Figures 4.7 and 4.8 with the values for your application.

CONFIG=>STATIC ROUTES=>IP=>ADD ROUTE

Parameter Example Your Application

Destination IP Address This IP address must match

the IP

address

given in figure 4.6

(CONFIG=>SYSTEM=>MODEMS=>

DIAL OUT TABLE=>ADD=>IP

ADDRESS)

Subnet Mask The subnet mask for

the Destination

IP Address

255.255.255.255

Gateway or Interface Interface

Interface SWAN

Is This a Backup Route? No

OSPF Advertises This

Static Route

FIGURE 4.7 STATIC ROUTE MENU PARAMETERS FOR INTERFACE ROUTE