Cyclades-PR2000 Access Router Installation Manual

Cyclades-PR2000

Chapter 3 - Using CyROS Menus 14

Chapter 3 Using CyROS Menus

This chapter explains CyROS menu navigation and special keys. There are four ways to interact with CyROS:

• Traditional menu interface using a console or Telnet session,

• CyROS Management Utility based on interactive HTML pages,

• SNMP (explained in the CyROS Reference Manual).

Connection Using the Console Cable and a Computer or Terminal

The first step is to connect a computer or terminal to the router using the console cable. If using a computer,

HyperTerminal can be used in the Windows operating system or Kermit in the Unix operating system. The

terminal parameters should be set as follows:

• Serial Speed: 9600 bps

• Data Length: 8 bits

• Parity: None

• Stop Bits: 1 stop bit

• Flow Control: Hardware flow control

none

[PR2000] login : super

[PR2000] Password : ****

Cyclades Router (Router Name) – Main Menu

1 – Config 2 – Applications 3 – Logout

4 – Debug 5 – Info 6 – Admin

Select Option ==>

FIGURE 3.1 LOGIN PROMPT AND MAIN MENU