User guide

26 Cyclades ACS 6000 Advanced Console Server Installation/Administration/User Guide
d. Enter the key or password to decode incoming encrypted data, then click Save.
IPv4 and IPv6 static routes
To add static routes:
1. Select Network - IPv4 Static Routes or IPv6 Static Routes. Any existing static routes are listed
with their Destination IP/Mask, Gateway, Interface and Metric values shown.
2. Click Add.
3. Select Default to configure the default route.
-or-
Select Host IP Or Network to enter custom settings for Destination IP/Mask.
Enter the required Destination IP/Mask Bits with the syntax <destination IP>/<CIDR> in the
Destination IP/Mask Bits field.
4. Enter the IP address of the gateway in the Gateway field.
5. Enter the number of hops to the destination in the Metric field, then click Save
Hosts
An administrator can configure a table of host names, IP addresses and host aliases for the local
network.
To add a host:
1. Select Network - Hosts.
2. Click Add to add a new host.
3. Enter the IP address, hostname and alias of the host you want to add, then click Save.
To edit a host:
1. Select Network - Hosts.
2. Click on the IP address of the hostname you want to edit.
3. Enter a new hostname and alias, as applicable, then click Save.
Firewall
Administrators can configure the ACS 6000 console server to act as a firewall. By default, three
built-in chains accept all INPUT, FORWARD and OUTPUT packets. Select the Add, Delete or
Change Policy buttons to add a user chain, delete user added chains and to change the built-in
chains policy. Default chains can have their policy changed (Change Policy) to accept or drop, but
cannot be deleted. Clicking on the Chain Name allows you to configure rules for chains.
Firewall configuration is available by clicking on Network - Firewall. Separate but identical
configuration screens are available from either the IPv4 Filter Table or IPv6 Filter Table menu
options.