User guide

18 AutoView Installer/User Guide
2. In non-secure mode, the Administrator Channel List appears.
-or-
In secure mode, the User Login window appears. Type in your
username and press Enter. The Administrator Channel List appears.
-or-
In secure mode, if you are the system administrator, log in as Admin, Root
or Administrator. Type your password and press Enter. The Administrator
Channel List appears.
Figure 3.2: The Administrator Channel List
3. If there is no keyboard activity, the login window will time-out after five
minutes and go blank, enabling the monitor’s energy saver. Press any key
to restore the login prompt.
Understanding the Administrator Channel List
The Administrator Channel List displays all named channels in your
AutoView system. They will be listed alphabetically with their channel
addresses and access status beside them. When in secure mode, only the
channels that are accessible to the logged in user will be listed. For more
information on security, see Setting User Station Security in this chapter.
Selecting channels
A computer may be selected via the OSD or, if you are in non-secure mode,
via channel push-buttons, the Scan button or keyboard hotkey sequences. (See
Keyboard Switching later in this chapter.) The amber LED on the front panel of
the switch will light at the active computer.
Administrator Channel List
Avocent Control Panel
F10-Logou
t
Name Address Acces
s
Accounting F K
Engineering E K
John’s PC C VK
Mail Server A VK
Pam’s PC B VK
Shop Floor D K