User guide

20 AutoView Installer/User Guide
Figure 3.3: Administrator Command Menu
Administrator Commands Features List
Command Description
Channel Maintenance Add, delete and edit the channel name, address, dwell time
and ID window
Administrator Functions Set up administrator, users, channel switching, port setup
and FLASH upgrade
Turn Scanning ON/OFF Control the mode where the switch scans from port to port
Scanning Order Set up a custom scan pattern
Sequential Scan Dwell Time Control the dwell time for each active channel in the system
Reset Std Mouse/Keyboard Reset the mouse and keyboard to restore correct settings
Reset Wheel Mouse/Keyboard Reset the mouse and keyboard to restore correct settings
Version Information Access the version information about your system
To access the Administrator Command Menu:
1. Press the keyboard Control key twice within one second.
2. In non-secure mode, the Administrator Channel List appears.
-or-
In secure mode, the User Login window appears. Type your
username and press Enter. The Administrator Channel List appears.
-or-
In secure mode, if you are the system administrator, log in as Admin, Root
or Administrator. Type your password and press Enter. The Administrator
Channel List appears.
3. Press the keyboard Control key twice within one second again. The
Administrator Command Menu appears.
Administrator Command Menu
Avocent Control Panel
ESC-previous
Channel Maintenance
Administrator Functions
Turn Scanning ON
Scanning Order
Sequential Scan Dwell Time
Reset Standard Mouse/Keyboard
Reset Wheel Mouse/Keyboard
Version Information
ENTER-accept