User guide

22 AutoView Installer/User Guide
7. When prompted for another cascade level, type N and press Enter.
-or-
Press Escape to exit the window without saving changes.
To add new channels with a cascaded unit:
1. Press the keyboard Control key twice within one second. The Administrator
Channel List appears.
2. Press the keyboard Control key twice within one second again. The
Administrator Commands menu appears.
3. Highlight Channel Maintenance and press Enter.
4. Highlight Add Channel and press Enter.
5. Type in a new channel name, up to 14 characters long, and press Enter.
6. Type a letter in the channel address for the PC you are naming and
press Enter.
7. When prompted for another cascade level, type Y and press Enter.
8. Enter the letter of the computer port on the cascaded AutoView you wish
to add and press Enter.
9. You may add up to two levels of cascaded switches. When you have
finished adding levels, type N when prompted for another cascade level
and press Enter.
To delete an existing channel:
1. Press the keyboard Control key twice within one second. The
Administrator Channel List appears.
2. Highlight the channel you wish to delete in the Administrator Channel List.
3. Press the Control key twice to access the Command Menu.
-or-
Type Alt-M to access the Command Menu.
4. Highlight Channel Maintenance and press Enter.
5. Highlight Delete Channel and press Enter.
6. Type Y or N at the prompt to confi rm the deletion and press Enter.