User guide

24 AutoView Installer/User Guide
Figure 3.6: Change Channel Address Menu
6. Type the new channel address and press Enter.
-or-
Press Escape at any point to exit this operation without saving the changes.
Configuring the ID Window
The ID window appears when you change channels and displays the name
of the selected channel. This window can be individually configured for each
channel in your system. The characteristics of the ID window can be changed
from the Channel Maintenance Menu. This option is only available if you are
operating in non-secure mode or if you are the system administrator.
To change the size, color and position of the ID window:
1. Press the keyboard Control key twice within one second. The
Administrator Channel List appears.
2. From the Administrator Channel List, press the Control key twice.
-or-
Type Alt-M to access the Command Menu.
3. Highlight Channel Maintenance and press Enter.
4. Highlight Options for ID window and press Enter. The ID window will
appear. Follow the procedures outlined in the following table to configure
your ID window.
Configure Channel
Avocent Control Panel
ESC-previous
Enter Channel Letter for
Accounting
A...H are valid
ENTER-accept