User guide

28 AutoView Installer/User Guide
To set up additional users:
1. Press the Control key twice to access the Administrator Channel List.
2. Press the Control key twice more to access the Command Menu.
3. Highlight Administrator Functions from the Command Menu and press Enter.
4. Highlight Setup User 1 from the Administrator Menu and press Enter.
5. Highlight Name and type the name for this user.
6. Highlight Password and type the password, then confi rm it for this user.
(Passwords are not case sensitive.)
7. Highlight Access . You will see a listing of all attached servers in the channel
list. For each server, choose a level of access for this user by selecting one
of the function keys listed on the menu: F5 for no access, F6 for video
only or F7 for video and keyboard/mouse capability. The default is set for
full access. All changes are immediately effective. Press Enter when you
have fi nished.
8. Highlight Logout Time. Type a value in minutes for this user’s logout time.
A value of ø keeps the user logged on continuously; 60 is the maximum
setting. The default is set for fi ve minutes.
9. Press Enter to accept your selections.
10. Repeat steps 4-9 for each remaining user.
Scanning your AutoView System
The AutoView scanning feature allows you to automatically monitor, or scan,
your computer channels without intervention. When keyboard activity is
detected, scanning is suspended until all keyboard activity stops. Scanning then
resumes with the next channel in sequence. Mouse activity will not affect
scanning in any way. The length of time each channel remains on the screen,
or dwell time, is configurable and can be changed at any time.
Scanning Options
There are two ways to scan through the channels in your AutoView system,
either sequentially or alphanumerically.
Scanning sequentially allows you to view each of your active channels in
the order that they are attached to the AutoView. The amount of time each
channel remains on the screen, or dwell time, is configurable and is the same
for all channels.