User guide

Appendices 115
3. In the Rows list, choose a value of 24 or 48. The default value is 24.
4. In the Columns list, choose a value of 80 or 132. The default value is 80.
Changing the Terminal Emulation mode
You may set the DSView management software Telnet application to emulate ASCII, VT100,
VT100+, VT102, VT52, VT220 or VT320 terminals, depending on the connected device. Appendix
E contains encoding and decoding information for each of the Terminal Emulation mode types.
To change the DSView software Telnet application Terminal Emulation mode:
1. Select Options - Session Properties from the menu bar.
- or -
Click the Session Settings icon in the toolbar.
2. Click the Terminal tab.
3. From the Terminal Emulation list, choose one option: ASCII, VT100, VT100+, VT102, VT52,
VT220 or VT320. The default value is VT100.
NOTE: When connecting to a DS appliance, the terminal type setting must match the Terminal Emulation
mode type.
Changing Arrow key sequences
When the Terminal Emulation mode is VT100, VT100+, VT102, VT52, VT220 or VT320, you
may specify either VT100 or ANSI
Arrow key sequences. The following table lists the Arrow keys
and the sequences transmitted for each.
* When the Terminal Emulation mode is VT52, the
Arrow keys are interpreted as indicated in this
column, regardless of the value in the Arrow Keys list.
To change the DSView software Telnet application Arrow key sequences:
1. Select Options - Session Properties from the menu bar.
- or -
Click the Session Settings icon in the toolbar.
2. Click the Terminal tab.
Table C.1: Arrow Key Sequences
Key VT100 ANSI VT52 *
Up Arrow <Esc> [A <Esc> OA <Esc> A
Down Arrow <Esc> [B <Esc> OB <Esc> B
Right Arrow <Esc> [C <Esc> OC <Esc> C
Left Arrow <Esc> [D <Esc> OD <Esc> D