User guide

128 DSView Installer/User Guide
To establish a remote DSView management software session over a
modem connection:
1. Establish a dial-up connection to the DSR1021 switch from the PC containing the DSView
management software. The IP address 10.0.0.2 will be assigned to the DSR1021 switch and the
IP address 10.0.0.3 will be assigned to the PC containing the DSView management software.
NOTE: Windows displays a dialog box that prompts the DS user for a username and password when a dial-up
connection is established. It is not necessary to enter a username or password in the dialog box. When this
dialog box appears, click OK to dismiss the dialog box.
2. When a connection is established, start the PC containing the DSView management software.
3. Select Options - Remote Operations - Enable. The Remote Login Authentication dialog
box displays.
Figure D.1: Remote Login Authentication Dialog Box
NOTE: The DSR1021 switch will disconnect the modem connection if a DS user does not log in within the time
period specified by the authentication time-out value. The default authentication time-out value (120 seconds)
may be changed using the Terminal Applications menu. See the DSR1021 Installer/User Guide for
more information.
The DSR1021 switch will attempt to contact the DSAuth Server to authenticate the DS user. If
the DSAuth Server is unavailable, the DSR1021 switch will use its internal database to
authenticate the DS user.
4. Type the username, password and domain to which you wish to connect and then click OK. If
authentication is successful, the DSR1021 switch, its ports and the outlets of any attached SPC
devices will appear in the DSView management software window topology view.