User guide

Appendices 137
Control Sequence Definition Encode/Decode
Esc [ ? 1 h
Modes to Set - Cursor Key
Mode Appl.
No/No
Esc [ ? 1 l
Modes to Reset - Cursor Key
Mode Cursor
No/No
Esc [ ? 2 l Modes to Reset VT52 No/No
Esc [ ? 3 h Modes to Set - 132 columns No/No
Esc [ ? 3 l Modes to Reset - 80 columns No/No
Esc [ ? 4 h Modes to Set - Smooth Scroll No/No
Esc [ ? 4 l Modes to Reset - Jump Scroll No/No
Esc [ ? 5 h
Modes to Set - Reverse
Screen Mode
No/No
Esc [ ? 5 l
Modes to Reset - Normal
Screen Mode
No/No
Esc [ ? 6 h Modes to Set - Relative Origin Mode No/No
Esc [ ? 6 l
Modes to Reset - Absolute
Origin Mode
No/No
Esc [ ? 7 h Modes to Set - Wraparound On No/No
Esc [ ? 7 l Modes to Reset - Wraparound Off No/No
Esc [ ? 8 h Modes to Set - Auto Repeat On No/No
Esc [ ? 8 l Modes to Reset - Auto Repeat Off No/No
Esc [ ? 9 h Modes to Set - Interlace On No/No
Esc [ ? 9 l Modes to Reset - Interlace Off No/No
Esc [ 6 n Report Cursor Position - Invoked by No/No
Esc [ P1; Pc R
Report Cursor Position -
Response is
No/No
Esc [ 5 n Status Report - Invoked by No/No
Esc [ 0 n
Status Report - Response is
terminal OK
No/No
Esc [ 3 n
Status Rpt - Response is terminal
not OK
No/No
Table E.7: VT100 ANSI Mode Control Sequences (Continued)