User guide

Chapter 2: Installation 15
b. Selecting Install for all users enables services to automatically start for all DS users. If
you do not specify this option, the Administrator must log in and start services for all
DS users.
To install using the DS appliance software downloaded from Avocent:
1. Log on to the PC as Administrator.
2. Using your DS appliance installer/user guide and quick installation guide, download the
DSWebview software from the Avocent web site. (Go to www.avocent.com and click the
Support link. On the Support page, click the Product Upgrades and Options link.)
3. Double-click on the executable downloaded from Avocent. The installation will begin.
4. Follow the on-screen instructions noting the following.
a. The default path c:\inetpub\wwwroot must be used when installing the
DSWebview software.
b. Selecting Install for all users enables services to automatically start for all DS users. If
you do not specify this option, the Administrator must log in and start services for all
DS users.
After DSWebview browser-based software installation
After you have installed the DSWebview software, do the following.
To configure the DSWebview browser-based software:
1. Ensure that the default web site is configured in the IIS Administration Console.
a. Start the IIS software.
b. Right-click on Default Web Page.
c. Click the Documents tab.
d. On the Documents tab, check Enable default document.
e. Ensure that dswebinterface.asp is in the list. If not, manually add it and move to the top of
the list.
NOTE: The dswebviewinterface.asp file must not be renamed.
Once set up correctly, the login page may be accessed by starting a web browser and visiting the
address of the web server (for example, http://webserver).
2. If you are not using the DSAuth Proxy Server, modify the Telnet application and
Video settings.
a. On the web server, change directories to c:\inetpub\wwwroot and open the Proxyports.asp
file in an ASCII text editor. By default, the file settings are 8023 for the Telnet application
and 8189 for Video.
b. If you are not using the DSAuth Proxy Server, change the Video and Telnet application
settings to zero (0).