User guide

16 DSView Installer/User Guide
c. Save and exit the Proxyports.asp file.
3. The DSWebview browser-based software may be assigned as a virtual directory using the IIS
software’s Create Virtual Directory Wizard to perform the following actions:
a. In the Virtual Directory Alias window, type
any.
b. In the Web Site Directory window, select the directory in which the DSWebview browser-
based software was installed.
c. In the Access Permissions window, check Read and Run Scripts to allow access
permissions to DSWebview Clients.
See your IIS product documentation for more information.
4. If the DSWebview browser-based software will be used with a Mac client, the following line
should be added to the Mac client’s /Library/Java/Home/lib/security/java.policy file:
"permission.java.util.PropertyPermission “*”, “read”;"
Displaying Firmware Version Information
You may display the version number of the firmware on DS appliances/DSR switches, CPS810
appliances or CPS1610 appliances. This information facilitates system troubleshooting and
support. For optimum performance, keep your firmware current.
NOTE: Firmware versions also display in the [appliance] tab in the Properties dialog box.
To display firmware version information:
1. From the DSView management software window, right-click on a DS appliance/DSR switch,
CPS810 appliance or CPS1610 appliance and select Show Version Number.
- or -
From the DSWebview Client Node Manager, place your cursor over a DS appliance/DSR
switch, CPS810 appliance or CPS1610 appliance and select Firmware Version from the
floating option menu.
A message box will appear containing the version number of the appliance.
2. Click OK to dismiss the dialog box.
Updating Firmware
The firmware on attached DS appliances may be updated by selecting the Tools - Update Firmware
command or clicking the Update Appliance Firmware toolbar icon. All DS appliances of the same
model type may be updated at the same time. To update a different DS appliance model, you will
need to perform the following process again when the current model update is completed.
NOTE: When updating the CPS810 appliances or CPS1610 appliances, application image updates must be
performed prior to boot image updates.