User guide

Chapter 4: DSView Management Software 35
To remove LDAP users:
1. In the DSView management software window, select Options - LDAP Database Maintenance -
LDAP Users. The LDAP Users dialog box will appear, containing a list of DS users and the
LDAP service to which they are associated.
2. Select one or more DS users from the Username list.
3. Click Delete. A Delete LDAP Users dialog box will display prompting you to confirm
the deletion.
4. Click Yes. The Deleting LDAP Users dialog box will appear and show the progress of the
deletion. The LDAP users are deleted and the dialog box is dismissed.
Logging onto LDAP servers
To use LDAP authentication, you must log in to the LDAP server. The following process occurs
when you log in:
• The DS user starts the DSView management software.
• The Windows Network credentials for the DS user are compared with those on the DSAuth
Server. If they do not match, the Enter Network Password dialog box displays and the user will
need to log in to continue.
• The LDAP user database on the DSAuth Server is searched for the DS user and, if found, will
be given access to the LDAP server for authentication. If the DS user is not found in the LDAP
user database, the Enter Network Password dialog box will appear again and the DS user must
log in again.
To log onto an LDAP server:
1. From the DSView management software window, select File - Connect As. The Enter Network
Password dialog box will appear.
Figure 4.9: Enter Network Password Dialog Box