User guide

Chapter 4: DSView Management Software 37
To specify a data encryption level:
1. From the DSView management software window, select a DSR switch and select Edit -
Properties from the drop-down menu.
- or -
Right-click and select Properties from the shortcut menu.
- or -
Click the Properties toolbar icon.
The Properties dialog box will appear.
2. In the [DSR Switch] tab, select an encryption level.
3. Click OK to dismiss the dialog box.
Adding and Configuring DS Appliances and Target Devices
Once you have installed your hardware and software, you will need to configure the DS appliances.
You may also need to configure KVM switches and associate SPC power control devices with an
appliance port.
Adding DS appliances and DSR switches
You may add a DS appliance or DSR switch to your system by selecting the File - New -
[DS Appliance/DSR Switch] command from the DSView management software window drop-
down menu.
To add a new DS appliance or DSR switch to the system:
1. From the DSView management software window, click View - Topology to display the DS
topology view.
2. Click Topology to add the new DS appliance or DS switch at the top level of the topology tree.
- or -
Expand the topology tree and click on the name of the group to which you wish to add the new
DS appliance or DS switch.
3. From the DSView management software window, select File - New - [DS Appliance/DSR
Switch]. The New dialog box appears.
4. In the [DS Appliance/DSR Switch] tab, enter the IP address for the appliance that you are
adding. This is the IP address that you assigned in the Terminal Applications menu. See the
installer/user guide for your DS appliance/DSR switch for more information.
5. Enter a name for the appliance that you are attaching. DS appliances/DSR switches can be
identified by name or IP address.
6. Select the type of DS appliance or DSR switch you wish to add.
7. Click on the Port tab and configure each individual port.