User guide

44 DSView Installer/User Guide
7. Click OK to add the new EVR1500 environmental monitor to the DSAuth Server and close the
dialog box. The new device appears in the topology and server views.
Adding and Managing DS Users
Adding DS users
You must add DS users within the DSView management software in order for them to have access
to the system. Users are assigned a default access level when they are added. If you wish to assign
DS users a different access level, you will need to change their permissions.
To add a user:
1. Within the DSView management software window, right-click on the DS appliance or port you
wish to change and select Permissions. This will activate the Permissions dialog box.
2. Click Add. A type-in field will appear in the User or Group column. Type the name of a DS
user and press
Enter to add the DS user. Go to step 6.
- or -
Click Browse. The Select Users, Computers or Groups dialog box will appear including a
listing of all DS users on the Windows domain. Continue to step 3.
Figure 4.10: Selecting DS Users to Modify
3. Select a DS username to add from the upper list box.
4. Click Add. The DS user is added to the lower list box.