User guide

46 DSView Installer/User Guide
Figure 4.11: Permissions Dialog Box
4. Click Everyone. The default setting shows both boxes checked. Check or uncheck the Admin
and User boxes to control access for all DS users without a specifically assigned configuration.
NOTE: Remember, Administrator access will allow the DS user to change permissions in the DSView
management software for any DS user listed.
5. Click OK.
If you selected a group or a DS appliance, a dialog box will appear prompting you to apply
permission changes to all “children.” Click Yes to apply the changes.
- or -
Click No if you do not wish to accept the changes.
To change specific user permissions:
1. Right-click on the entry you wish to change and select Permissions.
2. The Permissions dialog box will appear, listing all configured DS users. Change an individual
DS user’s access level by clicking on the username and selecting the access level you wish the
user to have. If a DS user isn’t listed, click the Add button. Refer to the previous section,
Adding DS users.
NOTE: If you remove all permissions from a port or DS appliance, access to that port or DS appliance will
be lost.