User guide

Chapter 4: DSView Management Software 49
9. The Status area displays the progress as each user is assigned the selected permissions to each
appliance or server.
10. Click Cancel to close the User Access dialog box.
11. A dialog box will appear prompting you to refresh the user, appliance, server and port listing in
the Global User Operations dialog box. Click Yes to update the listing.
To remove user access to an appliance:
1. From the Global User Operations dialog box, select a DS user in the User Permissions list.
2. Select File - Remove Access.
- or -
Click Remove Access.
3. A dialog box will appear prompting you to confirm the access removal. Click Yes.
4. Another dialog box will appear prompting you to verify the confirmation. Click Yes.
5. Repeat steps 1-4 to remove additional users.
To modify DS user access permissions:
The Permissions dialog box allows you to specify DS user or Administrator permissions for
appliance users. To access the Permissions dialog box, select a DS user in the Global User
Operations dialog box and then select File-Modify Access or click Modify Access. The Permissions
dialog box appears.
See Adding and Managing DS Users on page 44 for information on using the Permissions
dialog box.
Accessing Target Devices
You may access one or more target devices within a DS series appliance at the same time. To
access multiple target devices, double-click on every port that you wish to display. Windows may
be tiled or cascaded as you choose.
NOTE: A message box will display if an attempt is made to open a Video Viewer window while the DSRIQ
module attached to the port is being FLASH upgraded.
To access a target device:
1. Load the DSView management software. This will display the Node Manager and provide you
with a list of target devices that you may access.
2. Double-click on the target device that you wish to access. This will open a Video Viewer
window and allow the DS user control of the target device.