User guide

Chapter 4: DSView Management Software 55
2. Select one or more appliances or devices and then click the Add button (>). The selected appli-
ances or devices appear in the Selected Units list.
- or -
Click the Add All button (>>) to add all appliances or devices.
3. Select an option to perform. If an option cannot be performed on an appliance or device, it will
not be available. The options are:
• Delete - Deletes all appliances, all DS appliances/DSR switches or specific types of DS
appliances/DSR switches, all CPS810 appliances and CPS1610 appliances or specific
types of CPS appliances, or EVR1500 environmental monitors
• Reboot - Reboots all appliances, all DS appliances/DSR switches or specific types of DS
appliances/DSR switches, or all or specific types of CPS810 appliances and
CPS1610 appliances
• Show Version - Shows the version of all appliances, all DS appliances/DSR switches or
specific types of DS appliances/DSR switches, or all or specific types of CPS810
appliances and CPS1610 appliances
• Disconnect - Disconnects all target devices
• Power On - Powers up selected SPC device power outlets
• Power Off - Powers down selected SPC device power outlets
• Power Reboot - Reboots selected SPC device power outlets
• Update the DSView Names from Appliance - Retrieves all port and channel names from
CPS810 appliances, CPS1610 appliances and DS appliances/DSR switches containing
updated firmware, and updates the DSAuth Server database with the port and
channel names
4. Click Execute. A dialog box will appear and prompt you to confirm the action.
5. No dialog box will appear if you selected Show Version or Power On in the Select Operation
drop-down menu.
6. Click Yes to perform the operation on the selected appliances or devices.
- or -
Click No to cancel the operation.
7. The In Progress dialog box appears and displays overall progress. The Results area of the
Group Operations dialog box displays each appliance or device as it is processed. Clicking
Cancel in the In Progress dialog box will terminate processing after the current appliance or
device has been processed.
8. The In Progress dialog box will close when all appliances or devices have been processed and
the Operation Complete message will appear in the Results area of the Group Operations
dialog box.
9. Click Close to close the Group Operations dialog box.