User guide

64 DSView Installer/User Guide
To terminate the current DS user session:
1. Select a port in the DSView management software window.
2. Select Tools - Disconnect.
- or -
Right-click and select Disconnect from the shortcut menu.
- or -
Click the Disconnect toolbar icon.
3. A dialog box will appear prompting you to confirm the termination of the current DS
user connection.
4. Click Disconnect. A dialog box displays prompting you to confirm the termination of the DS
user session. Click OK. The current DS user will then receive a notification message.
To terminate a CPS appliance Telnet application connection:
1. Select a port in the DSView management software window.
2. Select Tools - Disconnect.
- or -
Right-click and select Disconnect from the shortcut menu.
- or -
Click the Disconnect toolbar icon.
3. If the CPS appliance is connected using the Telnet application, a dialog box appears prompting
you to terminate the current connection. Click Yes.
4. Another dialog box will appear prompting you to confirm the termination of the connection.
5. Click Yes. A dialog box displays prompting you to confirm the termination of the DS
user session.
6. Click OK. You will receive a notification message. Click OK to dismiss the message.
Global Keyboard Macros
Since the DSView management software runs on a PC, certain commands must be sent to the
controlled target device via keyboard macros. For example, pressing
Ctrl+Alt+Delete on your
keyboard would reset the PC running the DSView management software rather than resetting the
target device. To reset the target device, a macro is needed. Two kinds of macros are available in
the DS Management Software suite: Local Macros and Global Macros.
Local Macros may be created and accessed on the local computer using the Video Viewer window.
Local Macros may be customized and grouped in any manner you wish. See Chapter 6 for more
information on Local Macros.
Your DS Management Software suite is delivered with a number of pre-configured Global Macro
sequences for ease of operation. New Global Macros may also be created and maintained by DS