User guide

Chapter 4: DSView Management Software 67
Example: To create a macro where the Ctrl key is held while F1-F2-F3 are typed:
1. Enter a name for the macro. In this case,
Ctrl-F1-F2-F3.
Figure 4.17: Entering the Macro Name
2. The Ctrl key is pressed first and held, so double-click on the Left or Right Ctrl key under Dou-
ble-click for Key Press. It will move to the second list and the Press [Left Ctrl] command will
appear in the third list.
3.
F1, F2 and F3 are pressed and released in order. Locate F1 in the Double-click for Key Press
list and double-click it. It will move to the second list and the Press [F1] command will appear
in the third list.
4.
F1 will be released before F2 is pressed, so you will need to double-click on F1 under the Dou-
ble-click for Key Release list before proceeding. This will create a Release <F1> command in
the Macro Created list and F1 will disappear from the second list.