User guide

Chapter 5: DSWebview Browser-Based Software 79
To access a target device:
1. Load the DSWebview software. This will display the Node Manager and provide you with a
list of target devices that you may access.
2. Place your cursor over the target device that you wish to access and select Connect from the
floating option menu. This will open a Video Viewer window and allow the DS user control of
the target device.
Figure 5.3: The Video Viewer Window
Accessing EVR1500 environmental monitors
An EVR1500 environmental monitor is a network-based appliance that monitors environmental
conditions within the rack and/or data center and reports the data using the DSWebview software
browser. Environmental thresholds, such as alarm conditions, can be specified.
If the EVR1500 environmental monitor is attached to a CPS810 appliance or CPS1610 appliance, it
can be remotely powered up, powered down or rebooted using an SPC device. See Chapter 4 for
more information. See the EVR1500 Installer/User Guide for more information on using an
EVR1500 environmental monitor.
To launch an EVR1500 environmental monitor session:
1. Load the DSWebview software. This will activate the Node Manager and provide you with a
list of servers and serial devices that you may access.
2. Place your cursor over the EVR1500 environmental monitor that you wish to access and select
Connect from the floating option menu. The system is connected to the EVR1500 environmen-
tal monitor and will open a web browser interface.
NOTE: Browser cookies must be enabled and the user must accept certificates for access. The Java runtime
plug-in must be enabled for the browser being used for the EVR1500 environmental monitor interface.