User guide

Chapter 5: DSWebview Browser-Based Software 83
To terminate a DSR switch local port session:
NOTE: To terminate a local port session, the Enable checkbox must have been selected in the DSView
management software System Settings and the user terminating the session must have Administrator privileges.
1. Select a port on a DSR switch.
2. From the DSView management software window, select Tools - Disconnect.
- or -
Right-click and select Disconnect from the shortcut menu.
3. Place your cursor over a port in the DSWebview software window and select Disconnect from
the floating option menu.
A dialog box will appear prompting you to disconnect the local port session.
4. Click Disconnect. Another dialog box will appear prompting for verification that the current
connection should be terminated.
5. Click Yes to terminate the local port session.
Displaying Firmware Version Information
You may display the version number of the firmware on DS appliance/DSR switches, CPS810
appliances or CPS1610 appliances. This information facilitates system troubleshooting and
support. For optimum performance, keep your firmware current.
To display firmware version information:
1. From the DSWebview software window, place your cursor over a DS appliance/DSR switch,
CPS810 appliance or CPS1610 appliance and select Firmware Version from the floating
option menu.
A message box will appear containing the version number of the appliance.
2. Click OK to dismiss the dialog box.